Fireplaces CAD blocks

Fireplace CAD blocks for living room elevations: traditional fireplaces with a mantel or chimney breast, stone-clad and linear modern units, island and wall fireplaces with hoods, and suspended fireplaces hung from the ceiling in bowl, cone, oval and round shapes. Many run the full 102⅜″ (2600 mm) floor-to-ceiling height.

Every one downloads as a DWG or DXF in inches and millimeters, and as a PDF, PNG or SVG.

20CAD blocks 1block packs 5 formatsDWG in + mm

Stone-clad double-sided fireplace CAD block in elevation, 78¾″ × 102⅜″ — Point at a piece to see its size, click to open it. Every piece is drawn at its real size next to a 6 ft person.

Classic fireplace with mantel CAD block in elevation, 83½″ × 102⅜″ — Point at a piece to see its size, click to open it. Every piece is drawn at its real size next to a 6 ft person.

Designing, not drafting? These home furniture blocks also come as SVG vectors, PNG files with a transparent background and print-ready PDFs.

Home furniture in SVG Home furniture in PNG Home furniture in PDF

1 scenes · point at a piece to see its size

Fireplaces, to scale Elevation · to scale

Stone-Clad Double-Sided Fireplace · 78¾″ × 102⅜″ 8′-6⅜″2600 mm Stone-Clad Double-Sided …

Classic Fireplace with Mantel · 83½″ × 102⅜″ 8′-6⅜″2600 mm Classic Fireplace with M… 6′-0″1829 mm 6 ft person

Fireplace with bell hood CAD block in elevation, 63″ × 102⅜″

Fireplace with Bell Hood · 63″ × 102⅜″ 8′-6⅜″2600 mm Fireplace with Bell Hood

Island fireplace with hood CAD block in elevation, 66⅞″ × 98⅜″

Island Fireplace with Hood · 66⅞″ × 98⅜″ 8′-2⅜″2500 mm Island Fireplace with Hood

Linear fireplace with stone cladding CAD block in elevation, 118⅛″ × 102⅜″

Linear Fireplace with Stone Cladding · 118⅛″ × 102⅜″ 8′-6⅜″2600 mm Linear Fireplace with St…

Modern built-in fireplace with hood CAD block in elevation, 70⅞″ × 102⅜″

Modern Built-In Fireplace with Hood · 70⅞″ × 102⅜″ 8′-6⅜″2600 mm Modern Built-In Fireplac…

In this sceneStone-Clad Double-Sided Fireplace 78¾″ × 102⅜″2000 × 2600 mm Classic Fireplace with Mantel 83½″ × 102⅜″2120 × 2600 mm Fireplace with Bell Hood 63″ × 102⅜″1600 × 2600 mm Island Fireplace with Hood 66⅞″ × 98⅜″1700 × 2500 mm Linear Fireplace with Stone Cladding 118⅛″ × 102⅜″3000 × 2600 mm Modern Built-In Fireplace with Hood 70⅞″ × 102⅜″1800 × 2600 mm

Home furniture block packs

All packs

Fireplaces22

Frequently asked questions

How far must combustible trim stay from a fireplace opening?

The IRC keeps wood mantels and similar combustibles at least 6″ (152 mm) from the opening, and within 12″ (305 mm) of it they may project no more than 1/8″ for each inch of distance (R1001.11). Check the trim around the classic fireplace with mantel against that rule.

How tall must a chimney be above the roof?

At least 3′ (914 mm) above the point where it passes through the roof and 2′ (610 mm) higher than any part of the building within 10′ (3048 mm), the 3-2-10 rule of IRC R1003.9 for masonry chimneys. Factory-built chimneys follow their listing instead.

Can I use the suspended fireplaces in a US project?

As design references, yes: the suspended bowl fireplace and the suspended cone fireplace show the size and drop of a hanging unit. The product you install must be listed for US use, and its clearances and flue come from the manufacturer's instructions.