Vertical panel door CAD block · front elevation

DWGDXFPDFPNGSVG Inches + mm Base point at 0,0

See it as

3′-0¼″920 mm 6′-9¾″2077 mm

Front elevation · 36¼″ × 81¾″920 × 2077 mm · next to a 6 ft (1,829 mm) person

Get it as

DWG in DWG mm DXF

PDF PNG SVG

Description

Download the vertical panel door in front elevation, 36¼″ wide and 81¾″ high (920 × 2077 mm), drawn to real size.

You get the same block twice, as an inch DWG and a millimeter DWG, saved in AutoCAD 2000 format with the insertion point at 0,0.

Standard US interior doors are 80″ (2032 mm) high and 24–36″ (610–914 mm) wide; this one is 36¼″ wide. An accessible door gives at least 32″ (813 mm) of clear width, measured from the face of the open door to the stop. Next to the 6 ft figure on this page, it stands about 1.1 times as tall.

Working outside CAD? The same drawing also comes as a DXF for other CAD programs, a PDF for printing, a PNG with a transparent background for slides and mood boards and an SVG you can edit in Illustrator, Inkscape or Figma.

Common questions

What size is the vertical panel door drawn at?

It measures 36¼″ wide and 81¾″ high (920 × 2077 mm) in front elevation, taken from the outer edges of the drawing. The page shows the same sizes in both units next to the drawing.

Do I need to scale the block when I insert it?

No. cadgrid-vertical-panel-door_in.dwg is drawn in inches (INSUNITS 1) and cadgrid-vertical-panel-door_mm.dwg in millimeters (INSUNITS 4). Insert the one that matches your drawing at scale 1 and the block comes in at its real size.

How wide does an accessible door have to be?

The clear opening must be at least 32″ (813 mm), measured with the door open 90°. In practice that means a 36″ (914 mm) door leaf.

Can I use this vertical panel door outside AutoCAD?

Yes. Use the DXF in other CAD programs, the PNG with its transparent background in slides, documents and mood boards, the SVG to edit it in Illustrator, Inkscape or Figma, and the PDF to print it or send it to someone without CAD.